|
|
Netcomm V220
The NetComm V220 VoIP Telephone Adaptor (ATA) is designed for making phone calls over the Internet using Voice over Internet Protocol (VoIP). VoIP provides a higly cost effective means of making telephone calls and when bundled with a Naked ADSL or WiMAX services, can eliminate the need for a standard telephone service for making phone calls.
Features
- Two phone ports that allow VoIP calls over two handsets.
- Supports Caller ID, Call On-Hold, Call Forwarding and Call Waiting.
- Web-based Configuration.
The ATA has three lights on the top to indicate the status of the unit at any given time.
| ETH | On | Ethernet connection active. |
| Flashing | Data is being sent or received. | |
| Off | No Ethernet connection. | |
| SIP | On | The ATA is registered to the SIP server. |
| Off | The ATA is not registered to the SIP server. | |
| PWR | On | The device is on and getting power. |
| Off | The device is off or not getting power. |
Specifications
| Dimensions | Height: 22 mm, Width: 103 mm, Depth: 76 mm |
| Power | 12 VDC, 1.0 A |
| Ethernet | Single LAN/WAN port 10/100 Mbps |
| VoIP Ports | 2 FXS ports |
- Netcomm product information, support and updates
- Back to Hardware Profiles
Information
FAQs
Dial Up
Tools
Support Guides
Technical
